UNICOOL FAQ
Common Questions and Solutions for Unicool
Unit Offline indicates the communication between HVAC and controller is lost. If the user turns on the HVAC/WPU during Offline status, the unit will operate...
Fri, Dec 18, 2020 at 9:58 AM
The IP address of each unit needs to be set prior to integration into the control network. This article explains the IP address setting to enable communica...
Thu, Nov 30, 2023 at 2:59 PM
The IP address of each unit needs to be verified on both of the controller and HVAC units prior to integration into the control network. This guide provides...
Wed, Aug 26, 2020 at 8:56 AM
ASMUC provides easy access to the UNICOOL HVAC unit's measurement, including capacity regulation, inverter information, refrigerant pressure, temperatur...
Wed, Apr 27, 2022 at 12:02 PM
Dehumidification using the compressor or heater is available through the AIRSYS HVAC unit. It can be enabled under the Control Configuration menu. When the ...
Mon, Jul 27, 2020 at 5:04 PM
All UNICOOL models come with variable speed compressor and inverter/variable frequency drive. It is essential to record and identify the alarm code with err...
Tue, Dec 6, 2022 at 2:39 PM
Rebooting System can be done remotely for system (including HVAC and Master Controllers) that you have remote access to. Rebooting does not need to be done ...
Thu, Nov 30, 2023 at 2:58 PM